Retexturing & Road Line Removal Truck ARC 2400®
- RETEXTURING OF ROAD SURFACES
- MARKING REMOVAL
- RUBBER REMOVAL ON RUNWAYS
The ARC 2400® is a compact, easy to maneuver vehicle (6×2 chassis) with an extremely high performance.
In addition to the rear jetting device (3 x 800 mm), side jetting devices with a max. working width of 360 mm can be mounted on one or both sides of the truck. Each cleaning device can be activated or deactivated individually.
The ARC 2400® can be used on runways for rubber removal and on roads for marking removal and/or roughening.
PERFORMANCE ARC 2400®
|DESIGN AND PERFORMANCES ARC 2400®|
|MAX. WORKING WIDTH||2,400 mm
Note: Lower working width is available by installation of less nozzles in the 3 of 800 mm cleaning heads.
|MAX. WATER PRESSURE (operating / technical limit)||2,500 / 3,000 bar|
|TANK VOLUME (Standard)||17 m³|
|MAX. PUMP PERFORMANCE||72 l/min
Note: Technical performance limit of the most powerful pump. Other pumps available as per customer request.
|SPEED DURING OPERATION||3 - 8 m/min (0.18 - 4.80 km/h)
|ROTATION OF NOZZLES||0 - 2,500 rpm
|RUBBER REMOVAL PERFORMANCE (from – to)||Low layer removal (up to 2 mm): 4,600 – 5,700 m² / hour
Middle layer removal (up to 4 mm): 2,200 – 3,200 m² / hour
High layer removal (over 5 mm): 1,200 – 2,100 m² / hour
Note: ARC 2400 is the biggest model for rubber removal.
|LINEAR PAINT REMOVAL PERFORMANCE (from – to)||3,600 – 5,800* linear meters / hour
* Applicable for 1 layer of paint (standard thickness of 0.8 mm).
|THERMOPLASTIC REMOVAL PERFORMANCE (from – to)||3,300 – 5,300 linear meters / hour
Thermoplastic spray removal (up to 0.8 mm)
Thermoplastic flat line removal (up to 5 mm)
Thermoplastic dot line removal (up to 5 mm)
|POSSIBLE CLEANING OPTIONS||5|